Whirlpool 915 Dishwasher User Manual


 
Setting
the Controls
Operating your dishwasher’s controls properly helps you obtain the best possible washing
results. This section tells you how to select wash cycles and options.
Selecting a wash cycle
Press a Cycle pad. (Some cycles share the same pad.) Turn the cycle control knob to the
desired cycle.
A “J” shows what each cycle includes
CYCLE
MAIN
FINAL
TIME
CYCLE
WASH RINSE WASH RINSE RINSE DRY (Minutes:
POTS-N-PANS
Double wash for
maximum cleaning
of cooked-on or
baked-on foods.
Jt J Jt / 0 J 76’
l The water heats to 140°F in both
washes (marked+).
l The water heats to 140°F ) in the
final rinse (marked++).
HEAVY
(on some models)
Double wash for
cleaning heavily
soiled loads.
J J Jt J J++ J 76*
l Select Hi-Temp Wash to heat water
in the main wash (markedt).
l The water heats to 140°F in the final
rinse (marked++).
NORMAL
m
Double wash for
.
normal, everyday
0. .
soiled loads. (The
Energy Guide label
is based on this cycle.)
l Select Hi-Temp Wash to heat water
in the main wash (marked+).
l The water heats to 140°F in the final
rinse (marked++).
,
Jt J 0 J 66’
Cycle time includes dry time and may be longer depending on the temperature 01 water entering Ihe dishwasher. The cooler the waler. lhe longer
time. If the water is already hot enough, the cycle times will be as shown. The cycle control knob does not move while water is being healed
tne cycle
14