Filter
Top Products
1.Disconnectpowersupplytothe
dishwasher.
2. Turnoffwatersupplytothedishwasher.
3. Removethe4 screwsonthelower
accesspanelandremovethelower
accesspanel.
4. Placeashallowpanunderthewater
supplyvalve.Then,useawrenchto
disconnectthewaterinletfromthewater
supplyvalve.Separatethewaterinlet
fromthewatersupplyvalveanddrain
waterintothepan.
5. Removethespringclampfromthewater
outletandseparatefromthewater
supplyvalve;drainwaterintopan.
6. Reconnectbothwaterinletandwater
outlettothewatersupplyvalve.
7. Emptythepanandrepositionit under
thewaterpump.
8. Removetheclampanddisconnectthe
drainhosefromthewaterpump;drain
waterintopan.
9. Reconnectdrainhosetothewater
pump,beingsuretopositiontheclamp
overtheconnection.
10.Replacetheloweraccesspanel.
NOTE:Ifyourdishwasherisconnectedto
agarbagedisposal,donotrunwaterinto
thesinkafterwinterizing.Thiscouldcause
waterto refillthedrainhoseonyour
dishwasher.
Reconnecting your dishwasher
1. Remove the 4 screws on the lower
access panel and remove lower
access panel.
2. Turn on the water supply to dishwasher.
3. Turn on power supply to dishwasher.
4. Run dishwasher through a complete cycle
and check for leaks.
5. Replace lower access panel.
Storing for the summer
Protect your dishwasher during the summer
months by turning off the water supply and
power supply to the dishwasher.
Figure 1
Water outlet Spring clamp
Water supply Water Drain
valve inlet hose
Figure 2
outlet Spring clamp
Water supply Water
valve inlet
Water pump
and motor
Water pump
and motor
23