Whirlpool 940 Dishwasher User Manual


 
A %” shows what each cycle includes
CYCLE
MAIN
FINAL
TIME
CYCLE
WASH RINSE WASH RINSE RINSE DRY (Minutes)
POTSN-PANS
B
Double wash for maximum
cleaning of cooked-on or
I
bakedon foods.
et
a
et
.
Ott .
76’
l
The water heats to 140°F
(60°C) in both washes
(markedt).
l
The water heats to 140°F (6O’C) in
the final rinse (marked fl).
‘Cyde limo fndudes dry lime end may be longer depending on lhe temperature of water entering the dishwasher.
The cooler the waler, the bnger the cycle time. If the water is already hot enough, the cyde times will be as shown.
Using CANCEL/DRAIN
Press CANCEL/DRAIN to cancel a cycle or
to clear the indicators.
To cancel a cycle:
l
Press CANCEUDRAIN while the dish-
washer is running to start a P-minute drain.
It will take a few seconds for the drain to
start. If desired, select a new cycle. (See
“Changing a cycle or option setting” on
page 14.)
l
You can press CANCEUDRAIN again to
stop the drain immediately. Remember to
drain the dishwasher again before starting
a new cycle.
NOTE: A small amount of water remaining
in the dishwasher is normal.
To clear the indicators:
Press CANCEUDRAIN before starting the
dishwasher to clear all cycle and option
selections.
13