Filter
Top Products
20
To Set a Delayed Timed Cook:
Before setting, make sure the clock is set to the correct time of
day. See “Clock” section.
1. Press BAKE.
2. Set the temperature (optional).
3. Press the TEMP/TIME “up” or “down” arrow pad to enter a
temperature other than the one displayed.
4. Press COOK TIME. The cook time oven indicator light will
light up.
5. Press TEMP/TIME “up” or “down” arrow pad to enter the
length of time to cook.
6. Press START TIME. The start time/delay oven indicator light
will light up.
7. Press TEMP/TIME “up” or “down” arrow pad to enter the time
of day to start.
8. Press START.
When the start time is reached, the oven will automatically
turn on. The temperature and/or time settings can be
changed any time after pressing START by repeating steps
1-7. When the set cook time ends, the oven will shut off
automatically and “End” will appear on the display.
9. Press OFF/CANCEL or open the oven door to clear the
display.
SequenceProgramming
(on some models)
Sequence Programming allows you to program at one time up to
4 cook functions, and is usable with other electronic oven control
functions, such as the Timer and Warming Drawer.
Sequence Programming takes precedence over any
nonsequenced cook function. For example, if an untimed Bake
function is in process and a sequence program is started, the
untimed Bake function will be canceled, and the program
sequence will start.
All steps of a sequenced program must be programmed with a
stop time. If a stop time is not entered for a step in the sequence
program, and the ADD STEP pad is pressed, 3 tones will sound.
When using Sequence Programming, STEPS 1 2 3 4 will show on
the oven display.
To Program the First Step of the Sequence:
1. Choose a desired cook function by pressing any COOKING
OPTION key. For example, press BAKE.
“SET TEMP OR TIME OR PUSH START” will appear on the
oven display.
2. Set a desired temperature (optional).
“SET COOK TIME OR PUSH START” will appear on the oven
display.
If BAKE was pressed as your first step in the sequence, the
default temperature will be 350°F (177°C). Press the TEMP
“up” or “down” arrow pad to adjust the temperature.
3. To enter the first step of the sequence, enter a cook time by
pressing the HOUR and/or MIN “up” or “down” keys.
“PUSH START OR ADD STEP” will appear on the oven
display.
4. Press ADD STEP.
NOTE: If START is pressed after only one sequence has been
programmed, a regular cooking mode will start. For example, if
you chose BAKE as your first step, and START is pressed, the
oven will begin a normal baking cycle. After START has been
pressed, additional steps cannot be added to the sequencing. If
additional steps are desired, press OFF/CANCEL. This will exit
the sequence program, and the oven display will return to just the
time of day.
To Program Steps 2, 3 and 4 of the Sequence:
1. Press ADD STEP.
“SELECT COOK OPTION” will appear on the display.
2. Choose a desired cook function by pressing any cook
function key. For example, CHOICE BAKE
®
.
3. Select a desired temperature (optional).
4. Set the cook time by pressing the HOUR and/or MIN pads.
“PUSH START OR ADD STEP” will appear on the oven
display.
If you choose to press START, your program sequence will
begin. Additional steps cannot be added to the sequence
once START has been pressed.
If you choose to add an additional step, press ADD STEP.
“SELECT COOK OPTION” will appear on the oven display.
5. Continue repeating steps 1 through 4 until the maximum
number of sequences have been set. You can program up to
4 cooking functions within the sequence.
To Review/Modify Programmed Sequence:
If program steps are partially or completely programmed, yet the
sequence has not been started, the programmed cook functions
can be reviewed.
1. Press REVIEW STEPS. Step 1 will appear in the display
Subsequent presses of REVIEW STEPS will cause display of
programmed steps in order.
“STEP” and “REVIEW” will appear on the display. The
number of the displayed step will flash. A recalled step will
remain lit on the display for 5 minutes if no further action is
taken.
2. If fewer than four steps have been programmed, press
REVIEW STEPS repeatedly until the last programmed step is
displayed, then press ADD STEP if it is desired to program an
additional step.
While a step is recalled, a cook function pad can be used to
change the function, or the TEMP “up” or “down” arrow pad
can be used to change the set temperature.
The start time and stop time can be changed by pressing the
HR or MIN “up” or “down” arrow pads.
Changing the start time and stop time of a step will
automatically change the start times and stop times of all
subsequent programmed cook functions.
3. After Review/Modification of the programmed sequence is
complete, press START to begin sequence.