Whirlpool 98 Cooktop User Manual


 
Cleaning Chart
PART
WHAT TO USE
HOW TO CLEAN
Control knobs
Warm, soapy water and
l
Wash, rinse and dry well.
soH cloth.
l
Do not soak.
Control panel
Warm, soapy water or
9 Wash, rinse and dry well.
spray glass cleaner.
. Follow directions provided with
cleaner.
Black-glass
cooktop
SoH cloth ans warm,
soapy water.
Nylon or plastic
scouring pad for
stubborn spots.
. Wipe off regularly when cooktop
is cool.
. Do not use abraslve or harsh
cleansers.
Surface unlts
SoH cloth and warm,
l
Make sure the cooktop and the
(Solid
soapy water.
surface units are cool.
elements)
Soapy scouring pad or
l
Wipe off the surface unit aHer each
scouring powder. use.
9 Use wet soapy scouring pad on
hard to remove spots. Rinse Well.
After each cleaning, heat surface
unit until dry
To darken surface unlts or to remove rust spots:
SoH cloth and salt-free
l
Make sure surface units are cool.
oil.
9 AHer each cleaning, apply thin coat
of oil to surface units, then heat
for
3-5 minutes. Slight smoking of oil will
occur.
‘Electrol dressing,
l
Follow the directions on the dressing.
(PN 814030).
NOTE: This will Improve surface unlt
appearance, but not ellmlnate dark
spots.
(Trlm rlngs)
*Non-abrasive stainless
steel cleaner or Cook
Top Polishing Creme,
(PN 814009).
l
Make sure surface units are
cool.
l
Follow directions provided with
cleaner or polishing creme.
NOTE: Yellowlng of trlm rlngs Is normal from heat
of the surface units and pans.
*See page 8 for re-order information
9