Whirlpool AMW 735 Microwave Oven User Manual


 
2
INSTALLATION
PRIOR TO CONNECTING
ENSURE THAT THE APPLIANCE IS NOT DAMAGED. Check
that the oven door closes firmly against the door
support and that the internal door seal is not da-
maged. Empty the oven and clean the interior
with a soft, damp cloth.
AFTER CONNECTING
THE EARTHING OF THIS APPLIANCE is compulsory. The
manufacturer will accept no responsibility for in-
jury to persons, animals or damage to objects ari-
sing from the non-observance of this require-
ment.
The manufacturers are not liable for any pro-
blems caused by the user’s failure to observe
these instructions.
DO NOT OPERATE THIS APPLIANCE if it has a damaged
mains cord or plug, if it is not working properly,
or if it has been damaged or dropped. Do not im-
merse the mains cord or plug in water. Keep the
cord away from hot surfaces. Electrical shock, fire
or other hazards may result.
DO NOT REMOVE THE MICROWAVE INLET PROTECTION
PLATES located on the side of
the oven cavity wall. They
prevent grease & food parti-
cles from entering the micro-
wave inlet channels.
ENSURE the oven cavity is
empty before mounting.
CHECK THAT THE VOLTAGE on the rating plate corres-
ponds to the voltage in your home.
THE OVEN CAN BE OPERATED ONLY if the oven door is
firmly closed.
MOUNTING THE APPLIANCE
FOLLOW THE SUPPLIED separate mounting in-
structions when installing the appliance.
DO NOT USE EXTENSION CORD:
IF THE POWER SUPPLY CORD IS TOO SHORT, have a
qualified electrician or serviceman install
an outlet near the appliance.