Filter
Top Products
SERVICE
Whirlpool Europe 10.05.1995 / Page 5
Customer Service Doc. No: 4812 714 10519
Display symbols description
a) "AUTO" is lit when auto defrost, auto reheat, beverage or auto crisp is selected.
b) "CODE", together with a number, is lit when auto crisp reheat or auto crisp cook is selected. The number
indicates food class.
c) "SENSE" is displayed when an auto function is started.
d) Personal preference for the auto functions is indicated by "--", "-","+", "++". When no personal preference is
choosen, all are turned off.
e) The defrost symbol is lit during manual or auto defrost.
f) The reheat symbol is lit when Auto Reheat or Auto Crisp Reheat is selected.
g) The cook symbol is lit when Auto Crisp Cook is selected.
h) The grill symbol is lit when a function using the grill element is selected. The lower part of the symbol
blinks during cooking.
i) The MW symbols are lit when a function using microwaves is selected.
j) The defrost grid symbol is lit when Auto Defrost is selected, indicating that the defrost grid must be used.
k) The pan symbol is lit when a crisp function is selected, indicating that the crisp pan must be used.
l) The plate symbol is lit when a cooking function is selected, indicating that the turn table must be used.
m)The stage indicators are lit during stage cooking.
n The timer symbol is lit when the independent timer is displayed. It blinks when the timer operates in the
background.
o) The process/power bar indicates how far the process has advanced when using the auto functions.
1000W MW is indicated by a rolling bar.
Calibration
Before the oven can be operated, a calibration must be performed. To start a calibration, make sure that
a cross and a glass turn-table are mounted in the oven. A weight of 200 g must be placed on the centre
of the turn-table. Enter test mode and press START. The cavity light will go on, the turn-table will start
rotating and "CAL" will be displayed. After approximately 30 seconds a number will be displayed. This is
the calibration factor. Check that the number is within specified limits. Press START to store the factor. If
STORE is displayed, the factor has been stored successfully. Otherwise "ERR 8" will be displayed
Calibration factors should be between 170 - 194.
Real time clock
Time is set by pressing the CLOCK button. Set the hours with the timer knob. Press the CLOCK button
again and set the minutes with the timer knob. Finally, press the CLOCK button again to clear the sec-
onds and start the clock.
Cooking time
The cooking time is set with the timer knob. The maximum cooking time that can be set is 99 minutes.
Microwave power
To adjust the microwave power, press the POWER button. The current power level is displayed in Watts
for 2 seconds. The power level is stepped with the POWER button, while the power level is displayed. If
POWER is pressed when the oven is in stand by, the power level is set to 750 W. The oven is started
with the START button.