Filter
Top Products
Removing the base grille
To remove the grille:
1.
Open refrigerator door.
2. Pull base grille forward to release the
support tabs from the metal clips.
3.
Do not remove Tech Sheet
fastened
behind the grille.
To replace the grille:
1.
Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close refrigerator door.
See cleaning instructions for defrost pan and con-
denser coils on page 17.
Changing the light bulbs
Electrical Shock Hazard
Unplug the refrigerator before removing a light
bulb.
Failure to do so can result in death or
electrical shock.
To change the refrigerator light:
1.
Unplug the refrigerator.
2. Push lightly on top center of light shield until the
notched tabs unhook from the Control Panel.
3. Pull light shield down until the tabs clear the
Control Panel.
4. Lift back hooks of light shield out of their slots.
5. Replace with a 40-watt appliance bulb.
6. Replace light shield.
7. Plug in the refrigerator.
To change the freezer light bulb:
1.
Unplug the refrigerator.
2. Push in sides of light shield until they snap free.
3. Replace with a 40-watt appliance bulb.
4. Snap light shield into place.
5. Plug in the refrigerator.
NOTE:
Not all commercial appliance bulbs will fit your
refrigerator. Be sure to replace each bulb with one of
the same size and shape.
14