The grill and griddle (Model
CEX650V)
Lift-up cooktop (not included on
must hold cooktop up while
Models CEX200V, CEX210V &
cleaning.
..7
1. Lift grill/griddle cover and remove.
4. Wipe surface under cooktop wrtn
2. Remove the grill or griddle by
warm, soapy water. Use a soapy
lifting slightly at two dragonally-
plastic scouring pad on heavily-
opposite corners. Remove drip pan.
soiled areas.
3. Wash grill or griddle in warm,
soapy water. Use a plastic scouring
pad for heavily-sorled areas. DO
NOT use metal scouring pads or
abrasive cleansers; they will 1. Remove grill/griddle cover, grill or
Personal Injury And Product
scratch the non-stick finish.
griddle (Model CEX650V) and a
Damage Hazard
4. Empty and wash drip pan in warm,
front surface unit.
Be sure the rod is positioned all the
soapy water. Use a scouring pad for 2. Lift front of cooktop at surface unit
way to the front and is held
heavily-soiled areas. opening.
securely. The cooktop could
5. Rinse and wipe dry. 3. Carefully lower the cooktop onto
accidentally fall and injure you. Do
6. Replace the drip pan, grill or
the support rod.
not drop the cooktop. Damage can
griddle and cover.
NOTE:CEX310V does not include
result to the porcelain and the
support rod. For this model, you
cooktop frame.
Cleaningchart
Burn And Electrical Shock Hazard
Make sure all controls are OFF and the cooktop is cool before cleaning. Failure to do so can
result in burns or electrical shock.
PART
Cooktop surface
WHAT TO USE
Warm, soapy water and a soft cloth.
Plastic scouring pad for heavily-soiled
areas.
HOW TO CLEAN
. Wipe off regularly when cooktop is
cool.
m Do not allow food containing acids
(such as vinegar, tomato, lemon
juice or milk) to remain on surface.
Acids can remove the glossy finish.
. Do not use abrasive or harsh
cleaners.
Coil surface units and grill heating
No cleaning required,
.
element
Splatters or spills will burn off.
. Do not immerse in water.
Chrome reflector bowls
Warm, soapy water and a soft cloth;
. Clean frequently.
plastic scouring pad.
. Wash, rinse and dry well.
1 Do not use metal scouring pads or
harsh cleansers.
. Use plastic scouring pad for cooked-
on food.
Solid element surface units
Warm, soapy water and a soft cloth;
soapy plastic scouring pad or scouring
powder.
1 Wipe off after each use.
. Before cleaning, make sure the
cooktop and the surface units are
cool.
. After each cleaning, heat surface
units until dry.
. To darken surface units or to remove
rust spots, use salt-free oil on a soft
cloth. After each cleaning, apply
thin coat of oil to surface units, then
heat for 3 - 5 minutes. Slight smoking
of oil will occur. Use Electrol e
dressing (Part No. 814030). ‘Follow
directions on the dressing.
NOTE: This will improve surface unit
appearance, but will not eliminate
dark spots.
*See page 5 for ordering information,
Page 6