Installing Your Freezer
Proper installation of any appliance is very important. This section will tell you everything you
need to know to install your freezer properly.
Cleaning your freezer
Clean your freezer thoroughly before using it.
1. Use a sponge, cloth, or paper towel and
mild detergent in warm water to clean
outside and inside of freezer, door liner,
and gasket.
2. Wipe and dry thoroughly.
Locating the proper electrical supply
r
Fire Hazard
Do not use an extension cord.
Doing so can
result in death, fire, or
electrical shock.
Electrical Shock Hazard
Plug into a grounded three prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Failure to follow these instructions
can cause death, fire, or electrical
shock.
Recommended Grounding Method
A 115 Volt, 60 Hz., AC only 15 or 20 am-
pere fused and properly grounded electrical
supply is required. It is recommended that a
separate circuit serving only this appliance
be provided. Use a receptacle which cannot
be turned off with a switch or pull chain. Do
not use an extension cord.
Attach power cord lock, from literature
package inside the freezer, over power cord
plug. See Electrical Requirements and
Grounding Instructions Sheet in literature
package for complete details.
3-prong grounding
type wall receptacle
5