Filter
Top Products
Saving Energy
Saving energy is important and helps you save money. This section gives you tips on the
best ways to save energy with your dishwasher.
Loading tips
l
Wash full loads. Running a half-filled
l
Do not prerinse normally soiled dishes.
dishwasher uses the same amount of
Select the correct cycle for the load and
electricity and hot water as a fully-loaded
use the recommended amount of
machine.
detergent.
l
Load correctly for best washing results.
Incorrect loading may cause poor washing
and the need to rewash all or part of a load.
Cycle and option tips
l
Use the Low Energy/China cycle whenever
possible. The cycle uses less hot water
and energy than the Normal cycle.
l
Run your dishwasher during off-peak
hours. Local utilities recommend avoiding
heavy usage of energy at certain times
of day.
l
Do not use the High Temp Wash option if
it is not needed. When this option is off, if
water entering the dishwasher is lower
than 140°F (6073, the cycle does not take
additional time to heat water during the
main wash. In some cases, loads may not
dry as well when using the High Temp
Wash option.
NOTE:
Loads may not wash or dry as well
if the water temperature is too low. For
best dishwashing results, water must be
at least 120°F (49°C) as it enters the
dishwasher.
l
Use the Air Dry option whenever possible.
Allow longer drying times (overnight). Use
a rinse agent to improve drying.
To check water temperature:
1.
Run the hot water at the faucet closest to
your dishwasher. Let the water
run for at least 1 minute.
2. Hold a candy or meat thermometer in
the running stream of water.
If water temperature at the
faucet is below 120°F (49”(Z),
have a qualified person raise
the water heater’s thermostat
setting.
24