Filter
Top Products
Before starting
your dishwasher
DRY SELECTOR SWITCH DOOR LATCH
1. Read “Important Safety Instructions” on page
2 before starting your dishwasher.
3. Push door firmly when closing and it will auto-
matically latch.
2. Spin the Upper and Lower Spray Arms to
make sure nothing will stop them from turning
freely.
4. Run hot water at sink nearest dishwasher until
it is hot. Turn it off. See page 14 for connecting
instructions.
Starting your dishwasher
NORMAL WASH Cycle...
1. Select a drying option.
2. Turn Cycle Control Knob clockwise to
dot marked NORMAL. The dishwasher
will automatically start that cycle.
LIGHT WASH Cycle...
1.
Select a drying option.
2. Turn Cycle Control Knob clockwise
to dot marked LIGHT. The dishwasher
will automatically start that cycle.
RINSE & HOLD Cycle...
1.
Select AIR DRY OPTION only.
2. Turn Cycle Control Knob clockwise
to dot marked RINSE & HOLD. The dish-
washer will automatically start that
cycle.
Changing a setting
You can change a setting anytime during any
cycle.
1. Lift up on the door latch to unlatch the door
and stop the cycle. Don’t open the door until
3. Be sure the detergent dispensers are filled
the spray arms stop spinning.
properly for the new cycle.
2. Turn the Cycle Control Knob clockwise to the
4. Press door firmly to latch it. The dishwasher
cycle you want.
will automatically start the new cycle.