Filter
Top Products
LIGHT WASH Cycle
For normal, everyday soiled loads
Cycle time is about 60 minutes.
RINSE & HOLD Cycle
For rinsing a few items to be washed
one or more days later. Cycle time
is about 10 minutes.
Use AIR DRY only.
HEAT DRY or AIR DRY?
If the HEAT DRY Option is selected, air in the
night] and some water spotting may result.
dishwasher is heated during the “dry” part of
Some items (such as plastics) may need towel
the cycle.
drying.
If the AIR DRY Option is selected, air in the
For best results, use a solid rinse aid.
dishwasher is not heated. Using thisoption helps
save energy, but dishes take longer to dry (over-
Changing a setting
You can change a setting anytime during
any cycle.
1. Lift up on the door latch to unlatch the door
3. Be sure the detergent dispensers are filled
and stop the cycle. Don’t open the door until
properly for the new cycle.
the spray arms stop spinning.
4. Press door firmly to latch it. The dishwasher
2. Turn the Cycle Control Knob clockwise to the
will automatically start the new cycle.
cycle you want.
To add a dish after starting
1. To be sure the added item is washed and
rinsed, make sure the Cycle Control Knob
has not passed LIGHT.
2. Lift up on the door latch to unlatch door to
stop the cycle. Don’t open the door until the
spray arms stop spinning.
3. Open the door and add the dish.
4. Close the door. Do not latch it. Wait 30 sec-
onds for air in the dishwasher to warm up. This
helps reduce the amount of moisture that
can come from the vent when restarting the
cycle.
5. Press door firmly to latch it. The dishwasher
will automatically start where it stopped.
9