Filter
Top Products
Selecting a cycle
HEAT DRY Cycle
If the HEAT DRY Cycle is selected, air in the
dishwasher is heated during the”dry” part
of the cycle. (The Energy Guide label data
is based on this cycle.) Cycle time is
about 65 minutes.
AIR DRY Cycle
If the AIR DRY Cycle is selected, air in the
dishwasher is not heated. Using this option
helps save energy, but dishes take longer
to dry (overnight] and some water spot-
ting may result. Some items (such as plas-
tics) may need towel drying.
For best results, use a solid rinse aid.
RINSE & HOLD Cycle
For rinsing a few items to be washed one
or more days later. Cycle time is about 10
minutes.
To add a dish after starting
1. To be sure the added item is washed and
rinsed, add the item before the end of the
main wash.
2. Push up on door latch to unlatch door and
stop the cycle.
3. Open the door and add the dish.
4. Close the door. Do not latch it. Wait 30
seconds for air in the dishwasher to warm up.
This helps reduce the amount of moisture that
can come from the vent when restarting the
cycle.
5. Press in door to latch it. The dishwasher will
start where it stopped.