Filter
Top Products
Cycle Control Knob
Selecting a cycle
HEAVY WASH Cycle
A double wash for normal to heavily
soiled loads. (The Energy Guide
Label data is based on this cycle.)
Cycle time is about 60 minutes.
ENERGY SAVING
WASH Cycle
A light to normal, everyday soiled
loads. Uses less water and energy
than HEAVY WASH Cycle. Cycle time
is about 55 minutes.
RINSE & HOLD Cycle...
For rinsing a few items to be
washed one or more days later.
Cycle time is about 10 minutes.
HEAT DRY or AIR DRY?
save energy, but dishes ta ke longer to dry (over-
If the HEAT DRY Option is selected, air in the
night) and some water spotting may result.
dishwasher is heated during the “dry” part or
Some items (such as plastics) may need towel
the cycle.
drying.
If the AIR DRY Option is selected, air in the
Keep the door closed to allow the
Cycle Con-
dishwasher is not heated. Using this option helps
trol Knob to complete its cycle.
To add a dish after starting
4. Close the door. Do not latch it. Wait 30 sec-
1. To be sure the added item is washed and
onds for air in the dishwasher to warm up.
rinsed, make sure the Cycle Control Knob
This helps reduce the amount of moisture
has not passed ENERGY SAVING WASH.
that can come from the vent when restat-t-
2. Unlatch the doorto stop the cycle.
ing the cycle.
3. Open the door and add the dish.
5. Latch the door. The dishwasher will start
from where it stopped.