Filter
Top Products
Before starting
your dishwasher
1. Spin the Upper Spray Arm to make
sure nothing will stop it from turning
freely.
2. Close and latch the door.
3. Run hot water at sink nearest dish-
washer until it is hot. Turn it off.
Starting your dishwasher
Clean Selector Buttons
POTS & PANS Cycle...
1. Make sure Cycle Control Knob points
to dot marked POTS & PANS,
2. Push POTS & PANS Clean Selector
Button.
3. Push button for option desired.
4. Without turning it, pull out the Cycle
Control Knob to start the cycle.
NORMAL WASH Cycle...
1. Turn Cycle Control Knob clockwise
until It stops at dot marked NORMAL
WASH.
2. Push NORMAL WASH button.
3. Push button for optlon desired.
4. Wlthout turning It, pull out the Cycle
Control Knob to start the cycle.
HEAVY WASH Cycle...
1. Make sure Cycle Control Knob points
to dot marked HEAVY WASH.
2. Push HEAVY WASH button.
3. Push button for option desired.
4. Without turning it, pull out the Cycle
Control Knob to start the cycle.
RINSE & HOLD Cycle...
1. Select AIR DRY Option only.
2. Turn Cycle Control Knob clockwise to
dot marked RINSE & HOLD.
3. Close and latch the door to start the
cycle.
Changing a setting
you can change a setting anytime during
any cycle.
1. Unlatch thedoortostopthecycle.
2. With the Cycle Control Knob pulled out,
turn clockwise to the cycle you want.
3. Be sure the detergent dispensers are filled
properly for the new cycle.
4. Latch the door to start the Cycle.
To add a dish after starting
4. Close the door. Do not latch It. Wait 30 sec-
1. To be sure the added item is washed and
onds for air in the dishwasher to warm up.
rinsed, make sure the Cycle Control Knob
This helps reduce the amount of mOiStUre
has not passed NORMAL WASH
that can come from the vent when restari-
2. Unlatch the doorto stop the cycle, but don’t
ing the cycle.
open it until the spray arms stop spinning. 5. Latch the door. The dishwasher will start
3. Open the door and add the dish.
from where it stopped.
HI-TEMP WASHING Option
When this option is selected, water for the
rinsing action in those parts of the cycle will
main wash and the final rinse is heated [except
be longer if the water is heated. HI-TEMP wash-
in RINSE & HOLD) to 145°F (63°C). Washing and
ing is automatic in POTS & PANS.
8