Filter
Top Products
Run hot water at sink nearest dishwasher
until it is hot. Turn it off.
CYCLE SELECTOR
OPTION SELECTOR
BUTTONS
BUTTONS
Starting your dishwasher
1. Push a Cycle Selector Button for the desired
cycle.
2. Push Option Selector Button for desired op-
tion or options. (Use AIR DRY for RINSE & HOLD
Cycle.)
3. Turn cycle Control Knob clockwise to point to
a desired cycle. You will feel a definite stop
at each cycle mark.
- POTS & PANS and HEAVY WASH Cycles
share the same spot on the dial. The Clean
Selector Button determines which cycle
operates.
The dishwasher will automatically start that
cycle.
The AIR DRY Option
Air in the dishwasher is automatically heated
SOme
items [such as plastics) may need towel
during the “dry” part of all cycles.
drying.
If the AIR DRY Option is selected, air in the
dishwasher is not heated. Using this option helps
For best results, use a liquid rinse aid such as
Jet-Dry. il
save energy, but dishes take longerto dry (over-
night] and some water spotting may result.
HI-TEMP WASHING Option
When this option is selected, water for the
main wash and the final rinse is heated -
except in RINSE HOLD Cvcle - to 145‘F (63 Cl.
If water is already hot enough, the cycle
continues without delay.
Using DELAY START
1. Push desired Cycle Selector Button.
2. Push desired Option Selector Buttons.
3. Turn Control Knob clockwise to the number of
hours (from 1 to 6 hours] you want the dish-
washer to delay before the selected cycle
starts.
4. Close and latch the door.
NOTES:
l
You can add items while time is counting
down. Close and latch the door. The timer will
not advance if the door is unlatched.
l
RINSE & HOLD and LOW ENERGY WASH Cycles
can’t be delayed.
To add a dish after starting
1. To be sure the added item is washed and
rinsed, make sure the Cycle Control Knob
has not passed LOW ENERGY WASH.
2. Unlatch the doorto stop the cycle.
3. Open the door and add the dish.
4. Close the door. Do not latch it. Wait 30 sec-
onds for air in the dishwasher to warm up.
This helps reduce the amount of moisture
that can come from the vent when restart-
ing the cycle.
5. Latch the door. The dishwasher will start
from where it stopped.