Filter
Top Products
Before starting
you-
-_ -_-_ _ -_-__ _-
1. Read “Important Safety Instructions” on page
2 before starting your dishwasher.
2. Spin the Upper and Lower Spray Arms to
make sure nothing will stop them from turning
freely.
3. Push doorfirmly when closing and itwill auto-
matically latch.
4. Run hot water at sink nearest dishwasher until
it is hot. Turn it off.
St&ing your dishwasher
CYCLE SELE&R BUTTONS
1. Push a Cycle Selector Button for the desired
cycle. (Use NORMAL WASH for RINSE & HOLD
Cycle.]
2. Push Option Selector Button for desired option
or options. (Use AIR DRY for RINSE & HOLD
Cycle.)
3. Turn Cycle Control Knob clockwiseto pointto
a desired cycle. You will feel a definite stop
at each cycle mark.
- POTS & PANS and HEAVY WASH Cycles share
the same spot on the dial. The Cycle Selector
Button determines which cycle operates.
The dishwasher will automatically start the
selected cycle.
Selecting a cycle
POTS & PANS Cycle
Maximum cleaning for cooked- or
baked-on foods. Timer delays while
the dishwasher automatically heats
the water to 145’F (63°C) in both
washes and the last rinse (marked
l
).
Cycle time will be about 1% to 2
hours, depending on time needed
to heat water.
HEAVY WASH Cycle
A double wash for heavily soiled
loads. Cycle time is about 76
minutes.
NORMAL WASH Cycle
For normal, everyday soiled loads.
(The Energy Guide Label data is
based on this cycle.) Cycle time is
about 68 minutes.
LOW ENERGY WASH Cycle
For pre-rinsed or lightly soiled loads.
Cycle time is about 60 minutes.
RINSE & HOLD Cycle
For rinsing a few items to be washed
one or more days later. Cycle time is
about 14 minutes.
Use AIR DRY only. Do not use HI-TEMP
WASH Option.