Filter
Top Products
Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use
To remove glass shelves:
your refrigerator. Glass shelves are strong enough
to hold bottles, milk and other heavy food items.
1.
Tilt up at front.
2. Lift up at back.
GLASS SHELVES
HEAVY. BE CARE
- - iJ
. , .,.c...
Removing freezer shelf...
1.
Lift front slightly.
2. Lift back off supports.
3. Replace in reverse order.
3. Pull shelf straight out.
To replace glass shelves:
1.
Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot.
Lower front of shelf to level position.
I
LlFl THE FRONT
THEN THE BACK
For proper air movement, keep the freezer basket
in place when the refrigerator is operating.
To remove the basket:
1.
Slide out to the stop.
2. Lift the front to clear the stop.
3. Slide out the rest of the way.
To replace the basket:
1.
Place basket on the slides.
2. Make sure the wire stops clear the front of the
slides.
Removing the crispers and
crisper
covers...
To remove the crispers:
1.
Slide crisper straight out to stop.
2. Lift the front.
3. Slide the rest of the way out.
4. Replace in reverse order.
PUSH THE TAB ~‘*
TO CLEAR
To remove the cover:
THE COVER.
SNAP BACK
INTO PLACE.
Covers are held in place by two pegs at the back
and two notched tabs in front.
1.
Press front out of way
2. Lift cover front.
3. Lift back out of pegs.
4. Replace in reverse order.
COVER SUPPORT
If necessary, the center leg can be made shorter
or longer to help level the crisper covers. Turn the
leg clockwise to make it longer. Turn the leg coun-
terclockwise to shorten it.
6