Filter
Top Products
Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you
use your refrigerator.
To remove shelves:
1. Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace shelves:
I. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot.
Lower front of shelf to level position.
Removing the crisper, meat drawer
and covers.. .
To remove the crisper and meat drawer:
1. Slide crisper and meat drawer straight out to the
stop, lift drawer, then slide the rest of the way out.
2. Replace in reverse order.
To remove the covers:
1. Push up crisper cover glass insert from bottom,
then slide out with both hands.
2. Lift front of cover frame.
3. Lift out cover frame by pulling up and out.
4. Repeat for meat drawer cover.
To replace the covers:
I. Fit back of meat drawer cover in notch supports
on walls of refrigerator, then lower into place
2. Repeat for crisper cover frame.
3. Slide back of crisper cover glass Insert into
place, then lower front.
PULL OUT TO THE STOP.
LIFT THE FRONi
AND PULL AGAIN.
REMOVE THE
GLASS INSERT,
LlFl THE FRAME FRONT.
-~’
THEN THE BACK.
v!&
GLASS IS HEAVY.
*
BE CAREFUL.
Adjusting meat drawer temperature...
USE CONTROL TO ADJUST
Cold air flows against the meat drawer through
DRAWER TEMPERATURE
an opening between the freezer and the refrigera-
tor. This helps keep the meat drawer colder than
the rest of the refrigerator,
Slide the control to let more or less cold air
through.
Removing freezer bin.. .
For proper air movement, keep the freezer brn
in place when the refrigerator is operating.
To remove the bin:
1. Slide bin out to the stop.
2. Lift the front to clear the stop.
3. Slide out the rest of the way.
To replace the bin:
1. Place bin on the slides.
2. Make sure the stops clear the front of the
slides.
3. Slide bin in