Filter
Top Products
Pull out to the stop, lift the front
i I iI/l &dpullagain.
Remove the
Use control to
adjust
meat drawer
temperature.
I
Removing the freezer bin
For proper air movement, keep the freezer bin in
place when the refrigerator is operating.
To remove the bin:
1. Slide bin out to the stop.
2. Lift the front to clear the stop.
3. Slide out the rest of the way.
To replace the bin:
1. Place bin on the slides.
2. Make sure the stops clear the front of the slides.
3.
Slide bin in.
Removing the crisper, meat drawer
and cover
To remove the crisper and meat drawer:
1. Slide crisper and meat drawer straight out to
the stop, lift drawer, then slide out the rest of
the way.
2. Replace in reverse order.
To remove crisper cover:
1. Push up crisper cover glass insert from bottom,
then slide out with both hands.
2. Lift front of cover frame.
3. Lift out cover frame by pulling up and out.
4. Remove metal cover support.
To replace crisper cover:
1. Replace metal cover support on wall supports
in front section of cabinet.
2. Fit back corners into notch supports on walls of
refrigerator, then lower into place.
3. Slide back of glass insert into place, then lower
front.
Adjusting the meat drawer temperature
Cold air flows against the meat drawer through an
opening between the freezer and the refrigerator.
This helps keep the meat drawer colder than the
rest of the refrigerator.
Slide the control to let more or less cold
air through.
7