king your refrigerator
FREEZER CbNTROL
REFRlGERATdR CONTROL
Setting the controls...
Controls forthe refrigerator and freezer are in the
refrigerator. When the refrigerator is plugged in for
the first time...
i. Set the REFRIGERA-
TOR CONTROL to 3.-
2. Set the FREEZER
CONTROL to 6. -
EXTERIOR MOISTURE CONTROL
LIGHT SWITCH
Give the refrigerator time to cool down com-
pletely before adding food. (This may take sev-
eral hours.]
These settings should be about right for nor-
mal household refrigerator usage.
The controls will be set about right when milk or
juice is as cold as you like and when ice cream is
firm.
Changing the control settings...
c Adjust the Refrigerator Control first.
If you need to adjust temperatures in refrigerator
= Wait at least 24 hours between adjustments
or freezer, use the settings listed in the chart below,
e Then adjust the Freezer Control if needed.
CONDITION: REASON:
If Refrigerator Door opened often
Section is Large amount of food added
TOO WARM Room temperature too warm
--_
If Freezer
Door opened often
Section is Large amount of food added
TOO WARM Very cold room temperature
QUESTIONS?
(can’t cycle often enough]
. ..call your
If Refrigerator
COOL-LINE” Section is
Controls not set correctly
for your conditions
service
TOO COLD
assistance
telephone
If ICE isn’t Heavy ice usage
number
MADE FAST ENOUGH
Very cold room temperature
(Page
181.
-
(can’t cycle often enough]
If BOTH SECTIONS Door opened often
are TOO WARM Large amount of food added
Very warm or very cold
room temperatures
W.Q
Exterior Moisture Control
RECOMMENDED
CONTROL SETTINGS:
Refrigerator
4
Freezer
A
Refrigerator
3
Freezer
C
Refrigerator
2
Freezer
B
Refrigerator
Freezer
:
4
Refrigerator
Freezer
B
The Exterior Moisture Control on the Control
Console operates electric heaters around the
1. Use the “OFF” setting when humidity is low.
door openings. These heaters help keep moisture
2. Use the “ON” setting if moisture forms on the out-
from forming on the outside of the refrigerator,
side of the refrigerator,
i