Filter
Top Products
Using Your Refrigerator
Contmued
2. Lift the signal arm so it clicks into the OFF
position. Ice can still be dispensed, but no
more will be made.
3. Lift the front of the storage bin. Pull it out.
4. Empty the bin. Use hot or warm water to melt
the ice if necessary. Never use anything
sharp to break up ice in the bin. This can
damage the bin and dispenser mechanism.
5. Wash with mild detergent in warm water.
Rinse well. Do not use harsh or abrasive
cleanser or solvents.
6. When replacing the bin, make sure it is
pushed in all the way. Push the signal arm
down to the ON position to restart ice produc-
tion.
12