Filter
Top Products
Using your freezer
Setting the temperature control...
I, Insert a coin in the slot of the Temperature Control to
turn it.
2. Turn control to Number 3. This setting is designed to
maintain the temperature at or near 0°F ( - 17.8”C)
under normal operating conditions.
The sliding baskets...
Can be moved from side to side or removed when
loading or unloading food below them.
To remove:
Lift basket(s) out.
To replace:
Lower basket(s) into place.
Adjusting the temperature
control...
l
Turn control to higher number for colder tem-
peratures.
l
Turn to lower number for less cold temperatures,
Cooling freezer first...
1, Allow freezer to cool 6 to 8 hours before filling with
frozen food.
2. Let it cool overnight before adding large amount
of unfrozen food.
NOTE: When freezer is first started the compressor will
run constantly until the cabinet is cooled. It may take
up to 6 to 8 hours or longer, depending on room tem-
perature and the number of times the freezer lid is
opened.
After the cabinet is cooled the compressor will turn
on and off as needed to keep freezer at proper
temperature.
The outside of your freezer may feel warm. This is
normal. The freezer’s design and main function is to
remove heat from packages and air space inside the
freezer. This heat is transferred to the room air, so the
outside walls of the freezer may be warm.
The key eject lock...
can help reduce the hazard of child
entrapment
To lock or unlock the freezer you must hold the
key In the lock while turning. The lock is spring
loaded so the key cannot be left in the lock.
If the key is lost, contact your WHIRLPOOL
dealer for a replacement. Always give the com-
plete model and serial number of your freezer
when requesting a replacement key.