Filter
Top Products
steps:
If you need
service or help,
1. Before calling for service.. .
we suggest you
follow these three
If frost builds up on the trlm
strip around top of cablnet
1. Check the fit of the lid to make
sure it is sealing. With the lid
closed, press down firmly on
the edaes or at the center of
2. Do not open or close the lid
the lid.?his pressure will cause
by grasping a corner. Use the
handle.
the flexible lid to fit flat
against the cabinet and seal.
Performance problems often re-
sult from little things you can
find and fix yourself without tools
of any kind.
If electrlclty goes off
Learn how long power will be off
by calling the power company.
1. If service is to be interrupted
24 hours or less, keep freezer
closed. Most food will stay
frozen.
2. If service is to be interrupted
longer than 24 hours, do this:
(a) Remove all frozen food
and store in a frozen food
locker. Or...
(b) Place dry ice on top of
food, using as large
pieces as possible. Protect
your hands with gloves
when using dry ice.
(c] If neither food locker stor-
age nor dry ice is avail-
able, use or can
perishable food at once.
3. The length of time food will
stay frozen depends on sev-
eral factors. For instance: a full
freezer will remain cold
longer than a freezer only
partially filled. And a freezer
full of meat will stay cold
longer than a freezer filled
with baked goods. Also, if the
food still contains ice crystals,
it may be safely refrozen, al-
though the quality and flavor
may be affected. Use this food
as soon as convenient. If the
condition of the food is poor
or is any way questionable, it
is wise to dispose of it.
If freezer stops runnlng
1. Check to see if power cord is
plugged into the outlet.
2. Check fuse box or circuit
breaker.
3. Check electric company for a
power failure.
If motor seems to run too long
I. If large amounts of unfrozen
food have been put into the
freezer, motor will run longer.
2. On hot summer days or if room
is hot, motor will run longer to
provide correct amount of
cooling.
Part No 753274 Rev. B
Replaclng lamps
lnterlor light: If freezer has an in-
terior light, disconnect electric
cord from outlet. Replace bulb
with a 15-watt appliance bulb.
Reconnect freezer.
Exterlor slgnal Ilght: Disconnect
electric cord from outlet. Insert
screwdriver under metal edge,
being careful not to chip finish
of freezer, and snap out lamp
assembly. Unplug lamp and re-
place with lamp of same wat-
tage and size. Order lamp from
your Whirlpool dealer. Snap
light assembly back into place
making sure sealing gasket is
under outside edge. Reconnect
freezer.
2. If you need service.. .
Whirlpool Franchised
TECH-CARE@ Service
SYMBOL OF QUALITY SERVICE
It is reassuring to know that
Whirlpool stands behind your
new appliance with its network
of franchised TECH-CARE8 ser-
vice companies. TECH-CARE
service is designed to fulfill your
warranty and provide the after-
warranty service and mainte-
nance to keep your new appli-
ance in top notch condition,
anywhere in the United States.
Whirlpool wants you to get the
service that you would expect
on quality home appliances.
Or, It you need service...
1. Call the dealer from whom
you purchased the appliance
or a Whirlpool franchised
TECH-CARE service company.
He is in the Yellow Pages of your
telephone directory listed
under Refrigerators and Freez-
ers - Repairing or Servicing.
(Also under Washers, Dryers -
Repairing or Servicing.)
2. Should you not find a listing,
dial free, the Whirlpool
COOL-LINE” service assistance
telephone number (800)
253-1301. When calling from:
Michigan
. . . . (800) 632-2243
Alaska &
Hawaii . . . . .
(800) 253-1121
3. If you have a problem...
Call Whirlpool Corporation in
Benton Harbor at the COOL-LINE
service assistance telephone
number (see Step 2) or write:
Mr. Stephen E. Upton
Vice President
Whirlpool Corporation
Administrative Center
2000 U.S. 33, North
Benton Harbor, Michigan 49022
Remember...lf you must call or
write, please provide: your
name, address, telephone num-
ber, type of appliance, brand,
model, serial number, date of
purchase, the dealer’s name,
and a complete description of
the problem. This information is
needed in order to better re-
spond to your request for
assistance.
Helpful Hlnt...The model and
serial number plate is located
on the lower right side corner of
the freezer (see illustration on
front page).
FSPR IS a regIstered trademark
0
of WhIrlpool Corporotlon for
quollty parts Look for this
FSP
symbol of quollty whenever
you need a replacement part
8 for your WhIrlpool appliance
FSP replacement parts
WIII fit rIghI and work right because they are
made to the same exacting spec~f~cailons
used to build every new Whirlpool appliance
If you move...
To make sure that your appli-
ance is correctly installed and
to insure its continued satisfac-
tory operation, please
telephone your nearest
TECH-CARE service company
for installation or to get the
name of a qualified installer.
(Installation cost will, of course,
be paid bv vou.l
.I ,
Whirlpool
CORPORATION
Printed in U.S.A.