Filter
Top Products
9
Use the following chart as a guide for cookware material
characteristics.
ELECTRONIC OVEN
CONTROL
Oven Indicator Lights
The indicator lights are located to the left of, and within the
display. The indicator lights light up or flash when the oven is in
one of the following modes: BAKE, BROIL, START?, ON, TIMER,
COOK TIME/TIMED cooking (on some models), and START
TIME/DELAY cooking (on some models).
Display
When power is first supplied to the appliance, “PF” will appear on
the display. Press OFF/CANCEL to clear. If “PF” appears at any
other time, a power failure has occurred. Press OFF/CANCEL
and reset the clock if needed.
When the oven is in use, the display shows preheat time or oven
temperature setting. When the oven is not in use, the display
shows the time of day.
When using START TIME/COOK TIME the display will show either
hours and minutes, or minutes and seconds. When setting a
function, if START/ENTER is not pressed, and after 5 seconds,
the “Start?” oven indicator light will flash. Press START/ENTER,
or after 5 minutes, the set function will be canceled.
Start/Enter
The START/ENTER pad begins any oven function. On some
models, if pad is not pressed within 5 seconds after pressing a
function pad, the “START?” indicator light will flash as a reminder.
On some models, “START?” will appear on the display.
If pad is not pressed within 5 minutes after pressing a function
pad, the oven display will return to the time of day mode and the
programmed function will be canceled.
Off/Cancel
The OFF pad stops any function except the Clock, Timer and
Control Lock.
Clock
This is a 12-hour clock and does not show a.m. or p.m.
To Set:
Before setting, make sure the oven and Timer are off.
1.
Press CLOCK.
2.
Press the TEMP/TIME “up” or “down” arrow pad to set the
time of day.
3.
Press START/ENTER or CLOCK.
Timer
The Timer can be set in hours or minutes up to 12 hours and 59
minutes and counts down the set time. The Timer does not start
or stop the oven.
To Set:
1.
Press TIMER CANCEL*. The timer oven indicator light will
light up.
2.
Press the TEMP/TIME “up” or “down” arrow pad to set the
length of time.
3.
Press START/ENTER. When the set time ends, four 1-second
tones will sound.
4.
Press TIMER CANCEL* anytime to cancel the timer and/or
stop reminder tones. To cancel the timer during the
countdown, press TIMER CANCEL* twice.
The time can be reset during the countdown by repeating the
above steps. To display the time of day when the timer is
counting down, press CLOCK.
COOKWARE CHARACTERISTICS
Aluminum
■
Heats quickly and evenly.
■
Suitable for all types of cooking.
■
Medium or heavy thickness is best for
most cooking tasks.
Cast iron
■
Heats slowly and evenly.
■
Good for browning and frying.
■
Maintains heat for slow cooking.
Ceramic or
Ceramic glass
■
Follow manufacturer’s instructions.
■
Heats slowly, but unevenly.
■
Ideal results on low to medium heat
settings.
Copper
■
Heats very quickly and evenly.
Earthenware
■
Follow manufacturer’s instructions.
■
Use on low heat settings.
Porcelain enamel-
on-steel or cast
iron
■
See stainless steel or cast iron.
Stainless steel
■
Heats quickly, but unevenly.
■
A core or base of aluminum or copper on
stainless steel provides even heating.
1. Oven Display
2. Clock
3. Timer/Cancel
4. Start/Enter
(Control Lock)
5. Auto Clean
6. Off/Cancel
7. Temperature/Time
8. Cook Time
9. Start Time
10. Custom Broil
11. Bake
123456
11 10 9 8 7