Filter
Top Products
REFRIGERATOR
Setting the controls...
Controls forthe refrigerator and freezer are in the
Gfve the refrigerator time to cool down com-
refrigerator. When the refrigerator is plugged in for
pletely before adding food. (This may take sev-
the first time...
eral hours.]
1. Set the REFRIGERA-
TOR CONTROL to 3
These settings should be about right for nor-
mal household refrlgemtor usage.
2. Set the FREEZER
fRIEZEI
.WheAL” . cam..
The controls will be set about right when milk or
CONTROL to B. -
juice is as cold as you like and when ice cream is
firm.
Changing the control settings...
l Adjust the Refrigerator Control first.
If you need to adjust temperatures in refrigerator
l Wait at least 24 hours between adjustments.
or freezer. use the settings listed in the chart below l Then adjust the Freezer Control if needed.
QUESTIONS?
. ..call your
COOL-LINE@
service
assistance
telephone
number
[page 151.
CONDITION:
If Refrigerator
Section is
TOO WARM
If Freezer
Section is
TOO WARM
If Refrigerator
Section is
TOO COLD
REASON:
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold room temperature
(can’t cycle often enough]
Controls not set correctly
for your conditions
RECOMMENDED
CONTROL SETTINGS:
Refrigerator
Freezer
d
Refrigerator 3
Freezer A
Refrigerator
2
Freezer
B
If ICE isn’t Heavy ice usage
Refrigerator
MADE FAST ENOUGH Very cold room temperature Freezer
i
(can’t cycle often enough)
If BOTH SECTIONS Door opened often Refrigerator
4
are TOO WARM
Large amount of food added Freezer
B
Very warm or very cold
room temperatures
Power Saving Control...
1. Use the “CONSUMES LESS ENERGY” setting when
The Power Saving Control on the Control Con-
humidity is low.
sole operates electric heaters around the door
2. Use the “REDUCES EXTERIOR MOISTURE” setting if
openings. These heaters help keep moisture from
moisture forms on the outside of the refrigerator.
formino on the outside of the refrigerator.
- . . . . ...= -.. ..- - -.-._-
The indicator light will glow when the switch is in
P <.YTP
the “REDUCES EXTERIOR MOISTURE” position.