Filter
Top Products
Removing the meat drawer and cover
(Model ET14NKXE)
To remove the meat drawer:
1. Slide meat drawer out to the stop.
2. Lift front of meat drawer.
3. Slide meat drawer out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Tilt front of cover up.
2. Lift back of cover.
Pull out to the stop, lift the
front and pull again.
3. Pull cover straight out.
4. Replace cover in reverse order.
Using the optional automatic ice maker
If your refrigerator has an automatic ice
maker, or if you plan to add one later
(Part No. IMKIT), here are a few things you
will want to know.
l The ON/OFF lever is a wire signal arm.
DOWN to make ice automatically
UP to shut off ice maker
IMPORTANT: Do not turn the ice maker
ON until it is connected to a water supply.
Instructions for water supply hookup
are attached to the back of the refrig-
erator cabinet.
l If you remove the ice bin, raise the signal
arm to the OFF position. When you
replace the bin, push it all the way in and
lower the signal arm to the ON position.
l Good water quality is important for good
ice quality. Try to avoid connecting the
ice maker to a softened water supply.
Water softener chemicals (such as salt
from a malfunctioning softener) can
damage the ice maker mold and lead to
poor ice quality. If a softened water supply
cannot be avoided, make sure the water
softener is operating properly and is well
maintained.
UP to
stop ice
maker
DOWN to
start ice
maker
12