Whirlpool ET18DK Refrigerator User Manual


 
Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use
To remove glass shelves:
your refrigerator. Glass shelves are strong enough
to hold boffles, milk and other heavy food items.
1.
Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace glass shelves:
1.
Guide the rear hooks.into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot.
Lower front of shelf to level position.
Adiusting the
----------~ ---
e door bins...
GUI
PIN
To remove a door bin:
1.
Lift bin straight up.
2. Pull bin straight out.
To replace a door bln:
1.
Slide bin straight in above guide pins.
2. Push bin straight down.
Removing crispers and crisper cover...
PULL OUT TO THE STOP, LIFT THE FRONT
AND PULL AGAIN. To remove the crispers:
1.
Slide crisper straight out to the stop, lift front, then
slide the rest of the way out.
2. Replace in reverse order.
To remove the cover:
1.
Push up glass insert from bottom, then slide out
with both hands.
2. Lift front of cover frame.
3. Lift out cover frame by pulling up and out.
4. Remove metal cover support.
To replace the cover:
1.
Replace metal cover support on wall supports
in front section of cabinet.
2. Fit back of corner into notch supports on Walls
Of
refrigerator, then lower into place.
3. Slide back of glass insert into place, then
lower
front.
Lln THE FRAMi FRON
THEN THE BACK.
ASS IS HEAVY.
6