Filter
Top Products
Removing the crisper cover
ET18HN. ET18NK and ET18NM
To remove the cover:
1.
Remove the crispers.
2.
Lii cover front.
3. Pull cover up and out.
To
replace the cover:
1.
Fit back of cover into notch supports on
walls of refrigerator.
2. Lower front into place.
3. Replace crispers.
ETZONK and ETZONM
To remove the cover:
1. Push up glass insert from the bottom,
then slide it out with both hands.
2. Lift front of cover frame.
3. Pull cover frame up and out.
4. Remove metal cover support.
To replace the cover:
1.
Replace metal cover support on wall
supports in front section of cabinet.
Remove the
glass insert.
Lii front of
cover frame,
then the back.
2. Fit back corner of cover frame into notch
supports on walls of refrigerator, then
lower front onto metal cover support.
3. Slide back of glass insert into cover
frame. Then lower front to level position.
Using the ice cube trays
If you don’t use cubes, they may shrink. The
moving cold air starts a slow evaporation.
The longer you store cubes, the smaller they
get.
To remove ice:
1.
Hold tray at both ends.
2. Twist slightly.
11