Whirlpool ET18JK Refrigerator User Manual


 
Using your refrigerator
REFRIGERATOR. CONTROL
POWER SAVING CONTROL
Setting the controls...
Controls forthe refrigerator and freezer are in the
refrigerator. When the refrigerator is plugged in for
the first time...
DrcllcrPIToe
1.
Set the REFRIGERATOR
CONTROL to 3. -R
2. Set the FREEZER
CONTROL to 6.
Changing the control settings...
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart below.
CONDITION:
If Refrigerator
Section is
TOO WARM
If Freezer
Section is
TOO WARM
QUESTIONS?
. ..call Your
If Refrigerator
COOL-LINE” Section is
service
TOO COLD
assistance
telephone
If ICE isn’t
number
MADE FAST ENOUGH
(page 141.
If BOTH SECTIONS
are TOO WARM
LIGHT TWITCH
FREEZER-CONTROL
Give the refrigerator time to cool down com-
pletely before adding food. [This may take sev-
eral hours.)
These settings should be about right for nor-
mal household refrigerator usage.
The controls will be set about right when milk or
juice is as cold as you likeand when ice cream is
firm.
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Freezer Control if needed.
REASON:
Door opened often
Large amount of food added
Room temperature too warm
RECOMMENDED
CONTROL SETTINGS:
Refrigerator
4
Freezer
C
Door opened often
Large amount of food added
Very cold room temperature
(can’t cycle often enough)
Controls not set correctly
for Your conditions
Refrigerator
3
Freezer
A
Refrigerator
2
Freezer
B
Heavy ice usage
Very cold room temperature
(can’t cycle often enough)
Door opened often
Large amount of food added
Very warm or very cold
room temperatures
Refrigerator
Freezer
Refrigerator
Freezer
Power Saving Control...
The Power Saving Control on the Control Con-
1.
Use the “CONSUMES LESS ENERGY” setting when
sole operates electric heaters around the door humidity is low.
openings. These heaters help keep moisture from
forming on the outside of the refrigerator.
2. Use the “REDUCES EXTERIOR MOISTURE” setting if
moisture forms on the outside of the refrigerator.