Filter
Top Products
Solving common ice maker problems
PROBLEM POSSIBLE CAUSE/SOLUTION
Ice crescents attached
l This is normal. They break apart easily. Shake bin occasion-
at corners
ally to keep cubes separated.
Ice maker will not
operate or ice is not
made fast enough
l ON/OFF lever is in the OFF (up) position. Lower lever to the
ON (down) position.
l Freezer is not cold enough. Adjust temperature controls and
wait 24 hours. (See “Changing the control settings” on
page 8.)
Off-taste or odor in ice l New plumbing connections can cause discolored or off-
flavored ice. Discard the first few batches of ice.
l Cubes are stored too long. Throw them away and make a
new supply.
l Foods in freezer are not wrapped properly. See “Food
Storage Guide” on pages 20 and 21.
l Freezer and ice bin need to be cleaned. See pages 16
and 17.
Removing the base gril
To remove the grille:
1. Open refrigerator door.
2. Pull base grille forward to release the
support tabs from the metal clips.
3. Do not remove Tech Sheet fastened
behind the grille.
To replace the grille:
1. Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close refrigerator door.
See cleaning instructions for defrost pan and
condenser coils on page 17.
le
Condenser coils
13