Filter
Top Products
Pull out lo the slop,
llfl the front
nd pull again.
Remove the
glass insert,
lift the frame front,
then the back.
Remove the
glass Inset-&
lift the frame front.
: Re.rn6~iiig.the’xrispe’rc
To remove the crisper%:
1. Slide cnsper strarght out lo the slop, lrfl front.
then slrde out the rest of the way.
2. Replace in reverse order.
Removing the crisper cover
(Models ETPOGM, ETSOGK and ETZONK)
To remove the cover:
1. Push up glass insert from bottom, then slrde out
with both hands.
2. Lift lront of cover frame.
3. Lift out cover frame by pullrng up and out.
4. Remove metal cover support.
To replace the cover:
1. Replace metal support on wall supports In from
sectron of cabinet.
2. Frt back corner into notch supports on walls of
refrigerator. then lower into place
3. Slide back of glass insert into place, then
lower front.
Removing the crisper cover
(Models ET18GK, ET18HM and ET18HK)
To remove crisper cover:
1. Push up glass Insert from the bottom, then slide
out with both hands.
2. Lift front of cover frame and remove
cover support.
3. Lift out cover frame by pulling up and out.
To replace crisper cover:
1. Fit back of cover into notch supports on walls of
refrigerator, then lower front into place.
2. Insert cover support (with the long tab toward
the front) into the groove on the underside of
the crisper cover.
NOTE: If support needs adjustment, turn base
clockwise to raise, or counter-clockwise
to lower.
3. Slide back of glass Insert into place, then
lower front.
9