Using your refrigerator
REFRIGERATOR’COMROL INDICATOR-LIGHT
POWER SAilNG CONTROL
LIGHT-SWITCH FREEZER-CONTROL
Setting the controls...
Controls forthe refrigerator and freezer are in the
refrigerator. When the refrigerator is plugged in for
To adjust a conhol,
reach under the console
and turn the knob.
Glve the retrlgerator tlme to cool down com-
pletely before addlng food. (This may take sev-
eral hours.)
These setilngs should be about tight for nor-
mal household refrigerator usage.
The controls will be set about right when milk or
juice is as cold as you like when ice cream is firm.
Refirgerator Control adjustments range from 1 to
8. Freezer Control adjustments range from A to D.
Changing the control settings...
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart below.
l Adjust the Refrigerator Control first.
l Wait at least 24 hours between adjustments.
l Then adjust the Freezer Control if needed.
RECOMMENDED
CONDITION: REASON: CONTROL SEllINGS:
a_c_x.Ab%~a-s.
sm5m . ‘,.*^Y,-
- .I--
Door opened often Refrigerator
6
Large amount of food added Freezer
D
Door opened often Refrigerator
4
2
COOL-LINE@
Controls not set correctly Refrigerator
Section ls
for your conditions
Freezer A
service
TOO COLD
assistance
-is,-“.
L “. _n_..az 1 “,.,“C . KNOTT
w- ~~Inm->R.~- <___/a
telephone
If ICE isn’t
Heavy ice usage Refrigerator
4
number
MADE EAST ENOUGH Very cold room temperature Freezer
A
@we 15 I.
(can’t cycle ofte
__1m C**I-~YME&mY-*.z QOI.---.*-ll-
.~ L_. .- -. I rjr, _
s-mI”v
If BOTH SECTIONS Door opened often Refr,igerator
are TOO WARM Large amount of food added Freezer
Verv warm or very cold
room temperatures
Power Saving Control...
1. Use the “CONSUMES LESS ENERGY” setting when
The Power Savlng Control on the Control Con-
humidity is low.
sole operates electric heaters around the door
2. Use the “REDUCES EXTERIOR MOISTURE” setting if
openings. These heaters help keep moisture from
moisture forms on the outside of the refrigerator.
forming on the outside of the refrigerator.
The indicator light will glow when the switch is in
POWER
SAVING CONTROL
the “REDUCES EXTERIOR MOISTURE” position.
couI”Y~s PtD”Cls
LESS EIIIPICQ
tNlKG” MOlSWll
5