1 PART
Door liners
and gaskets
WHAT TO USE
HOW TO CLEAN
I
Sponge, soft cloth
l Wash, rinse and dry thoroughly.
or paper towel with
mild detergent and
DO NOT USE cleaning waxes, concen-
warm water
trated detergents, bleaches or cleaners
containing petroleum on plastic parts.
Plastic parts
(covers and
panels)
Soft, clean sponge
or soft, clean cloth
with mild detergent
and warm water
l Wash, rinse and dry thoroughly.
DO NOT USE paper towels, window
sprays, scouring cleansers or flammable
fluids. These can scratch or damage
material. See “Important Safety instruc-
tions” on page 3.
Defrost pan Sponge or cloth
with mild detergent
and warm water
Condenser
coils
Floor under
refrigerator
Vacuum cleaner
with extended
narrow
attachment
Floor cleaners
l Remove base grille. (See page 12.)
l To remove defrost pan, lift pan over wire
brace (remove tape; if any).
l Wash, rinse and dry thoroughly.
l Replace with notched corner to the rear.
Push it in all the way.
l Make sure defrost pan drain tube is
pointing into pan.
l Replace base grille.
l Remove base grille.
l Vacuum coils when dusty or dirty. Coils
may need to be cleaned as often as every
other month.
l Replace base grille.
l Roll refrigerator out only as far as the water
supply line allows.
l Clean floor.
l Roll refrigerator back into place.
l Check to see if the refrigerator is level.
15