Filter
Top Products
The storage drawer
The storage drawer is for storing pots
and pans. The drawer can be removed to
make it easier to clean under the range,
and to check for installation of the anti-
tip brackets. Use care when handling
the drawer.
Removing the storage drawer:
Levi&
1. Empty drawer of any pots and pans
before removing drawer. Pull
drawer straight out to the stop.
2. Push up plastic lever on both sides
of drawer.
Replacing the storage drawer:
1. Make sure ball bearings on oven
slide rail are positioned toward the
front of the opening.
2. Fit ends of drawer slide rails into
the oven slide rails on both sides of
opening.
3. Slide drawer closed.
To verify that the anti-tip
bracket(s) is engaged:
1 Remove storage drawer.
1 Look to see if the anti-tip bracket(s)
is attached to floor with screws.
. Make sure rear leveling leg(s) is
positioned under bracket(s).
m See “Important Safety Instructions”
on page 2 and Installation
Instructions for further details.
NOTE: The range will not tip during
normal use. Tipping can occur if
excessive force or weight is applied to
open door without anti-tip bracket(s)
properly secured.
3. Pull drawer out a little farther until
levers stay in “up” position. Pull
drawer the rest of the way out.
Page 8