Filter
Top Products
14
REFRIGERATOR
FEATURES
Refrigerator Shelves
The shelves in your refrigerator are adjustable to match
your individual storage needs.
Storing similar food items together in your refrigerator and
adjusting the shelves to fit different heights of items will
make finding the exact item you want easier. It will also
reduce the amount of time the refrigerator door is open,
and save energy.
To remove a shelf:
1. Remove items from the shelf.
2. Slide shelf straight out to the stop
3. Depending on your model, lift back or front of shelf to
pass stop.
4. Slide shelf out the rest of the way.
To replace a shelf:
1. Slide back of shelf into shelf track in wall of cabinet.
2. Guide front of shelf into shelf track.
3. Slide shelf in all the way.
Drop-in Door Trim
The door trim may be removed for easier cleaning.
To remove the trim:
1. Remove all items from the shelf.
2. Pull straight up on each end of the trim.
To replace the trim:
1. Locate each end of the trim piece above the trim
pocket opening.
2. Push the trim straight down until it stops.
Meat Drawer and Cover
(on some models)
To remove the meat drawer:
1. Slide meat drawer out to the stop.
2. Lift front of meat drawer with one hand while
supporting bottom of drawer with other hand. Slide
drawer out the rest of the way.
3. Replace by sliding the drawer back in fully past the
drawer stop.
To remove the cover:
1. Remove meat drawer.
2. Push cover back to release the rear clips from the shelf.
3. Tilt cover up at the front.
4. Pull cover forward and out.
To replace the cover:
1. Fit notches and clips on underside of cover over rear
and center crossbars on the shelf.
2. Lower cover into place.
3. Pull cover forward to secure rear clips onto the shelf.
4. Replace the meat drawer.
Crisper and Crisper Cover
(on some models)
To remove the crisper(s):
1. Slide crisper(s) straight out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace the crisper(s) in reverse order.