Filter
Top Products
Operating Instructions
Continued
3. Turn Cycle Control Knob clockwise to point
to a desired cycle. You will feel a definile stop
at each cycle mark. The dishwasher will
automatrcally start that cycle.
NOTE: If the door is latched, you will hear
cycles start and stop as the knob passes each
cycle mark. This is normal and will not hurt the
dishwasher. If you prefer, you can set cycles
with the door unlatched.
To add a dish after starting
1. To be sure the added item is washed and
rinsed, make sure the Cycle Control Knob has
not passed LIGHT WASH.
2. Lift up on the door latch to unlatch door and
stop the cycle. Don’t open the door until the
spray arms stop spinning.
3,,0pen the door and add the dish.
4. Close the door. Do not latch it. Wait 30
seconds for air in the dishwasher to warm up.
This helps reduce the amount of moisture that
can come from the vent when restarting the
cycle.
5. Press door in to latch it. The dishwasher will
start where it stopped.