Filter
Top Products
19
To Delay Start Self-Clean:
Before delay starting Self-Clean, make sure the oven door is
completely closed or it will not lock and the cycle will not begin.
1. Press START TIME.
“PRESS (^) FOR UPPER OVEN” will scroll in the upper text
area, and “PRESS ( ) FOR LOWER OVEN” will scroll in the
lower text area.
2. Press the Temp/Time “up” or “down” arrow pads to select the
desired oven.
“--:--” will be displayed, and “Set starting time. Push START”
will scroll from right to left in the selected oven text area for
2 minutes or until the Temp/Time “up” or “down” arrow pads
are pressed again.
3. Press the Temp/Time “up” or “down” arrow pads until the
desired time is reached.
“Select cooking/cleaning mode” will scroll in the selected
oven text area for 2 minutes or until a cooking cycle is
selected.
4. Press PRECISE/STEAM CLEAN.
“REMOVE RACKS” will scroll in the selected oven text area
for 5 seconds, followed by “SELECT OPTION.” In the other
text area, “PRESS (^) or ( ) KEY” will scroll from left to right.
5. Press the Temp/Time “up” or “down” arrow pads until the
desired temperature is displayed.
“Push START” will scroll in the selected oven text area.
6. Press the Temp/Time “up” or “down” arrow pads to select the
desired cleaning level. The desired clean level and “PUSH
START” will scroll in the displays.
7. Press START.
The cleaning cycle will begin, and the name will scroll in the
upper text area.
8. “UNLOCK IN XXX” will scroll in the upper or lower text area
(depending on oven selection). After 5 seconds, “LOCKING”
will scroll until the door is locked.
After the door is lock, “CLEAN UPPER” or “CLEAN LOWER”
will scroll in the selected oven text area until the clean cycle is
finished.
When the self-clean cycle ends:
“CLN COMPLETE will scroll in the selected oven text area. After
5 seconds, “OVEN COOLING” will scroll in the display until the
oven temperature falls below 500°F (260°C).
“UNLOCKING” will be displayed until the oven door unlocks and
the lock icon turns off.
SteamClean
(on some models)
The SteamClean feature is designed for light oven cavity bottom
cleaning on models that have hidden bake in both ovens.
Allow the range to cool to room temperature before using the
SteamClean feature. If your oven cavity is above 100°F (38°C),
OVEN COOLING will appear in the display and the SteamClean
feature will not activate until it cools down.
■ Remove all racks and accessories from the oven cavity.
■ For best results, use 4 oz (118 mL) of distilled or filtered water.
■ The SteamClean feature will take a total of 20 minutes. A
beep will sound at the end of the cycle.
IMPORTANT: Because the water in the oven bottom is hot, do
not open the oven door during the SteamClean cycle.
Press CANCEL/OFF at any time to end the cycle. The display will
return to the time of day.
Helpful Hints
■ Once the SteamClean cycle is complete, remove all
remaining water in the bottom of the oven with a sponge or
cloth.
■ Wipe any remaining moisture from the oven door interior,
oven cavity interior sides, and cooktop.
■ Use a soft brush or nylon scrubber to wipe the oven interior.
This may help with more stubborn stains.
■ It is recommended to use distilled or filtered water, as tap
water may leave mineral deposits on the oven bottom. Use a
cloth soaked with vinegar or lemon juice to remove any
mineral deposits that may be left after the SteamClean cycle.
■ If the oven is heavily soiled, use the Self-Clean cycle. The
SteamClean cycle may be used first to eliminate most of the
debris, resulting in a more effective self-clean.
To SteamClean:
1. Remove all racks and accessories from the oven cavity.
2. Press Steam/Precise Clean.
3. Add 4 oz (118 mL) of distilled or filtered water to the oven
bottom.
4. Press START.
5. After 20 minutes, a beep will sound to signal the end of the
cycle.
6. Press CANCEL to clear the display.
7. Remove any excess water with a sponge or cloth and wipe
down oven interior.
^
^