Whirlpool GGG390LXS Range User Manual


 
8
Display
When power is first supplied to the range, or if a power failure has
occurred, 12:00 will appear on the display. See “Clock” in the
“Settings” section to set time of day.
When the oven is not in use, the display shows the time of day,
unless the oven is in Energy Save mode.
Cancel
The Cancel pad stops any function except the Clock, Timer and
Control Lock.
Oven Lights
While the oven doors are closed, press OVEN LIGHT to turn the
lights on and off. Both oven lights will come on when either door
is open. The oven lights will not come on during the Self-Clean
cycle.
Kitchen Timer
The Kitchen Timer can be set in hours or minutes up to 9 hours
and 59 minutes, and counts down the set time. The Kitchen
Timer does not start or stop the oven.
To Set:
1. Press TIMER SET/OFF pad.
“Set TIMER” will scroll down the upper text display area and
the clock will display “--:--” with the colon flashing.
2. Press the Temp/Time “up” or “down” arrow pads until the
desired time is reached.
“Press TIMER” will scroll down the upper text display area.
3. Press TIMER SET/OFF to start the timer.
The colon stops flashing, and the time begins counting down.
“TIMER STARTED” will scroll down the upper text display
area.
The last minute of the timer countdown will be displayed in
seconds.
At the end of the set time, one long beep will sound, and
“TIMER End” will be displayed.
4. Press TIMER SET/OFF to clear the display.
NOTE: A reminder beep will sound until the Kitchen Timer is
canceled.
To Cancel:
Press the TIMER SET/OFF pad.
Settings
Settings enables you to personalize audible tones and oven
operation to suit your needs. After completing your adjustments,
press CANCEL or wait 30 seconds for the display to show the
time of day.
Energy Save
The Energy Save mode deactivates the display to reduce energy
consumption.
To Activate the Energy Save Mode:
1. Press and hold SETTINGS for 3 seconds. “Energy save on.”
will appear in the upper text area.
2. The setting will be activated after 5 minutes.
Any mode may be used with the range in Energy Save by
simply selecting the desired mode.
To Deactivate the Energy Save Mode:
1. Press and hold SETTINGS for 3 seconds. “Energy save off.”
will appear in the upper text area.
2. The clock will reappear in the display, and the range can be
operated as usual.
Fahrenheit and Celsius
The temperature is factory preset to Fahrenheit, but can be
changed to Celsius.
1. Press SETTINGS once.
“TEMP UNIT” will appear in the upper text area, while
“FAHRENHEIT. Press (^) for Celsius” will scroll twice from
right to left in the lower text area.
2. Press the Temp/Time “up” arrow pad to change the
temperature unit setting.
“CELSIUS. Press (^) for Fahrenheit” will scroll twice from right
to left in the lower text area.
3. “CELSIUS Selected” will scroll right to left in the lower text
area. The temperature units have been changed.
Tones
Tones are audible signals, indicating the following:
Basic Functions
One tone
Valid pad press
End of Kitchen Timer (long tone)
Function has been entered
Oven is preheated
Three tones
Invalid pad press
Four tones
End of cycle
Adjusting Sound On or Off
The oven sound is factory set for On but can be changed to Off.
1. Press SETTINGS twice until “SOUND” appears in the upper
text area and “ON. Press (^) for OFF” scrolls twice from right
to left in the lower text area.
2. Press the Temp/Time “up” arrow pad to turn the sound Off.
“OFF. Press (^) for ON” will scroll twice from right to left in the
lower text area.
3. “OFF Selected” will scroll from right to left in the lower text
area. The sound has now been turned off.
Adjusting Sound Volume
The oven sound is factory preset for High but can be changed to
Low.
1. Press SETTINGS 3 times until “SOUND VOLUME” appears in
the text area and “HIGH. Press (^) for LOW” scrolls twice
from right to left in the lower text area.
2. Press the Temp/Time “up” arrow pad to turn the sound Low.
“LOW. Press (^) for HIGH” will scroll twice from right to left in
the lower text area.
3. “Low Selected” will scroll twice from right to left in the lower
text area. The sound volume has now been changed.