10
FLIP AWAY™ plate holders (on some models)
You can fold up all, or part, of the row of V-shaped flexible tines
at the back of the bottom rack. This is useful when washing a
variety of dishes, pots and pans, or roasters.
Fold-down tines (on some models)
You can fold down one row of tines at the back of the bottom
rack.
1.
Grasp the tip of the tine that is in the tine holder.
2.
Gently pull the tine out of the tine holder.
3.
Lay the row of tines down in the rack to make room for larger
dishes, bowls, pots, pans or roasters.
Utensil rack (on some models)
Use the Utensil rack to hold specialty cooking items (wooden
spoons, spatulas, and similar items).
The Utensil rack lies on the two supports in the right lower rack.
Load the rack tray while it is in the dishwasher or remove it for
loading on a counter or table top.
When not in use, the utensil rack may be left in the dishwasher
and tilted out of the way.
You can also remove the utensil rack from the dishwasher. Swing
the two supports out of the way for easier bottom rack loading.
Loading Silverware Basket
Load the silverware basket while it is in the dishwasher or take
the basket out for loading on a counter or table.
NOTE:
Unload or remove the basket before unloading the racks
to avoid spilling water droplets on the silverware.
To open the silverware basket
Unlock the latch.
NOTE:
Be sure the cover is completely latched before pulling out
the bottom rack and before closing the dishwasher door.
Place the entire row of tines in the down
position when washing a large number of
plates.
Fold away the plate tines to hold many bowls.
Fold away the entire row of both plate and
bowl tines to make room for larger pans or
roasters.