Whirlpool GU1500 Dishwasher User Manual


 
15
*If the incoming water is less than the recommended
temperature or food soils are heavy, the cycle will automatically
compensate by adding time, heat, and water as needed.
Canceling a Cycle
Anytime during a cycle, press
If your dishwasher has a dual-digit display, it shows
Your dishwasher starts a 2-minute drain (if needed). Let the
dishwasher drain completely. The light turns off after 2
minutes.
NOTE:
If your dishwasher does not need draining, the light
turns off. Select a new cycle and options.
To stop the drain
You can press Cancel again to stop the drain immediately.
Remember to drain the dishwasher before starting a new cycle.
To clear the indicators
Press Cancel before starting the dishwasher to clear all options
and cycles.
Changing a Cycle or Setting
During the first fill of a cycle
1.
Press a new cycle and/or options.
2.
Check the detergent dispensers. They must be filled properly
for the new cycle.
After the first fill of a cycle
1.
Press
If your dishwasher has a dual-digit display, it shows
Your dishwasher starts a 2-minute drain (if needed). Let the
dishwasher drain completely. The light turns off after 2
minutes.
NOTE:
If your dishwasher does not need draining, the light
turns off.
2.
Check the detergent dispensers. They must be filled properly
for the new cycle.
3.
Close the door.
4.
Press a new cycle and/or options.
Adding Items During a Cycle
You can add an item anytime before the main wash starts. Open
the door and check the detergent dispenser. If the cover is still
closed, you can add items.
To add items
1.
Lift up the door latch to stop the cycle. Wait for the spraying
action to stop before opening the door.
2.
Open the door. If the detergent dispenser cover is still closed,
add the item.
3.
Close the door firmly until it latches. The dishwasher resumes
the cycle after about a 5-second pause.
Option Selections
You can customize your cycles by pressing an option. If you
change your mind, press the option again to turn the option off,
or select a different option if desired.
You can change an option anytime before the selected option
begins. For example, you can press an unheated drying option
any time before drying begins.
After a wash cycle, the dishwasher remembers the options used
and uses the same options in the next wash cycle, unless you
select new options or press Cancel.
Use this rinse cycle for
rinsing dishes, glasses,
and silverware that will
not be washed right
away.
Initial display time after
rotating clock pattern:
4 min
Do not use detergent
with this cycle.
Pre-
Wash
Main
Wash
Rinse Rinse Final
Heated
Rinse
Dry Time
(min)
Water
Usage
(gal/L)
10 1.8-2.7/
6.8-10.2