Whirlpool GW399LXUQ Range User Manual


 
9
To Change the Clock to 24-hour Format:
1. Press and hold CANCEL and FAVORITE for 3 seconds.
2. Press PRESETS 0 on the number pad to select 24 hour. Press
again to select 12 hour.
To Set:
1. Press CLOCK. The time of day will flash in the display.
2. Press the appropriate number pads to set the time of day.
The colon flashes.
3. Press CLOCK or wait 4 seconds. The colon stops flashing.
To Cancel the Clock Display:
If you do not want the time of day to display:
Press and hold CANCEL and CLOCK for 3 seconds. The time of
day will disappear from the display.
When the clock display is canceled, press CLOCK to briefly
display the time of day.
To Restore the Clock Display:
Press and hold CANCEL and CLOCK for 3 seconds. The time of
day will reappear in the display.
Timer
The Timer can be set in hours or minutes up to 99 hours and
59 minutes, and counts down the set time.
The Timer can be used independently of any other oven function.
It can also be set while another oven function is operating.
NOTE: The Timer does not start or stop the oven.
To Set:
1. Press TIMER.
“0:00” and “TIMER” will flash in the display.
2. Press the appropriate number pads to set the length of time.
The selected time appears in the display and “TIMER”
continues to flash.
3. Press TIMER again or wait 4 seconds. Time will begin
counting down and “TIMER” is displayed.
When the set time ends, 1 long beep will sound and “TIMER”
and “End” will be displayed.
4. Press TIMER to clear the display.
To Cancel:
1. Press TIMER and set time to “0:00.”
Control Panel and Oven Door Lock
The lock feature shuts down the control panel pads (buttons) and
locks the oven door to avoid unintended use of the oven(s).
The lock feature is preset unlocked, but can be locked.
If the oven is currently in use, the controls cannot be locked.
To Lock Control Panel and Oven Door:
Press and hold CANCEL and COOK & HOLD for 3 seconds
(press CANCEL first). “OFF” appears in the display and “LOCK”
flashes while the door is locking. Once the oven door is locked
“LOCK” is displayed.
To Unlock Control Panel and Oven Door:
Press and hold CANCEL and COOK & HOLD for 3 seconds
(press CANCEL first). “OFF” disappears in the display and
“LOCK” flashes while the door is unlocking. Once the oven door
is unlocked “LOCK” disappears from the display.
Oven Temperature Control
IMPORTANT: Do not use a thermometer to measure oven
temperature because opening the oven door and element or
burner cycling may give incorrect readings.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature
calibration can be adjusted. It can be changed in Fahrenheit or
Celsius.
A minus sign means the oven will be cooler by the displayed
amount. The absence of a minus sign means the oven will be
warmer by the displayed amount. Use the following chart as a
guide.
To Adjust Oven Temperature Calibration:
1. Press BAKE.
2. Enter 550° by pressing the appropriate number pads.
3. Immediately press and hold BAKE pad for several seconds or
until “0°” appears in the display.
If the oven temperature was previously adjusted, the change
will be displayed. For example, if the oven temperature was
reduced by 15 degrees the display will show “-15°.”
4. Press the PRESETS 0 number pad to adjust the temperature.
Each time PRESET 0 is pressed, the temperature changes by
5 degrees, rising from “0°” to “35°” and then continuing from
“-35°” to “0°.” If in Celsius mode, the temperature changes
by 3 degrees, rising from “0°” to “21°” and then continuing
from “-21°” to “0°.”
5. The time of day will automatically reappear in the display.
You do not need to readjust the oven temperature if there is a
power failure or interruption. Temperature adjustments can be
made to Bake, Convect Bake (on some models) and Convect
Roast (on some models) only. Broil, Warm and Self Clean
temperatures cannot be adjusted.
To Display Temperatures in °C instead of °F:
1. Press and hold the CANCEL and BAKE buttons for
3 seconds. A single beep will sound, and the current setting
will be displayed.
If no change is made, the range will return to the existing
setting after 30 seconds.
2. Press the PRESETS 0 number pad to change the setting.
Wait 5 seconds and the setting will be complete.
ADJUSTMENT °F
(ADJUSTMENT °C)
COOKS FOOD
5° to 10°F (3° to 6°C) ...a little more
15° to 20°F (9° to 12°C) ...moderately more
25° to 35°F (15° to 21°C) ...much more
-5° to -10°F (-3° to -6°C) ...a little less
-15° to -20°F (-9° to -12°C) ...moderately less
-25° to -35°F (-15°C to -21°C) ...much less