Filter
Top Products
10
GB
WEIGHT SENSOR
THIS MICROWAVE OVEN USES THE WEIGHT SENSOR TECHNOLOGY for some 6th sense functions (Defrost, Crisp
and Steam); when you select one of these 6thSense functions, you just need to select type of
food you want to process and press start: the microwave automatically detects the weight of
food and set the cooking time accordingly.
D
URING THE SENSING PHASE weight icon blinks and progress bar shows the
weight calculation process (see sample below, from 6th Defrost function).
WEIGHT SENSING CALIBRATION
Weight sensor technology requires a Calibration process before rst use.
Suggest user to make the calibration once a year.
T
HE CALIBRATION PROCESS MUST BE DONE with only the Turn Table glass in the cavity.
PRESS AND HOLD for few seconds the Stop TurnTable button.
T
HE CALIBRATION PROCESS starts and the display shows:
-- weight icon blinking
-- calibration progress bar
WHEN THE CALIBRATION PROCESS is nished, the Microwave returns to stand by mode.
SET CLOCK
WHEN THE APPLIANCE IS FIRST PLUGGED IN or after a power failure, the
product will enter clock setting. If the clock is not set, the display
will remain “:“ instead of the clock.
NOTE: YOU CAN PRESS&HOLD FOR A FEW SECONDS THE STOP BUTTON in
standby mode to access the clock setting mode.
q
TURN THE ADJUSTABLE KNOB to set the hours.
w
PRESS KNOB BUTTON. (The two right-hand digits (minutes) flicker).
e
TURN THE ADJUSTABLE KNOB to set the minutes.
r
PRESS THE KNOB BUTTON AGAIN.
T
HE CLOCK IS SET and in operation.
IF STOP is pressed in clock setting mode, the clock will be disabled
the display shows “:“.
NOTE: KEEP THE DOOR OPEN WHILE SETTING THE CLOCK. This gives you 10
minutes to complete the setting of the Clock. Otherwise, each step
must be accomplished within 60 seconds.