Filter
Top Products
14
Setting the clock
NOTE: These examples are for double
upper ovens only. Other ovens may look
slightly different.
NOTE: If a timed oven function is active or
programmed, you cannot change the clock.
If an untimed oven function is active or
programmed, you can change the clock,
however the start time will disappear.
1. Press Clock Set/Start pad.
2. Set time.
3. Start clock.
If time has not been entered correctly,
three short tones will sound and “Err” will
be displayed. The display will show the
last valid time to appear on the display.
Repeat Steps 2 and 3 to re-enter the
time of day.
To disable the display clock:
You can clear the time of day from the
display by pressing and holding CLOCK
SET/START for 5 seconds. Repeat to see
time of day on display again.
PRESS YOU SEE
HR MIN MIN SEC
(last time of day on
display) (colon is
flashing)
CLOCK
SET START
•
3
3
0
PRESS YOU SEE
MIN SEC
PRESS YOU SEE
MIN SEC
START
U sing Your Oven