Filter
Top Products
3
*Always refer to Service Sheet and Use and Care Manual for information specic to the refrigerator you are servicing.
Removing Ice Maker Assembly
Insert a straight blade screwdriver in the slots on the bottom
of the fascia and twist the blade to release.
Pull out the bottom of the fascia and roll up to release the
hooks on the top of the fascia.
Remove the ¼ screw securing the ice maker assembly to
the top of the cabinet.
Move a shelf to the top position on the left RC ladder. Re-
move the ice maker assembly and rest on the shelf.
Disconnect the wire harnesses and remove the
ice maker assembly.
The ice maker wiring harness is now being routed through the top of the cabinet. This
change has made the removal and installation of the ice maker much easier.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.