Whirlpool lSF014BEW Range User Manual


 
If you need service or assistance, we
suggest you follow these three steps:
1, Before calling for
If control knob(s) will not turn:
assistance...
l Did you push in before trying to turn?
Performance problems often result
If cooking results aren’t what you
from little things you can find and fix
expected’
without tools of any kind.
l Is the range level?
If nothlng operates:
l If baking, have you allowed 1Yz to 2
l Is the range properly connected to
inches (4-5 cm] on all sides of the
gas and electrical supplies? (See
pans for air circulation?
“Installation Instructions.“)
l Have you preheated the oven as the
l Have you checked your home’s
recipe calls for?
main fuses or circuit breaker box?
l Are the pans the size called for in the
l Is the flow of combustion and/or
recipe?
ventilation air to the range
l Are you following a tested recipe
blocked? Do not block the air flow
from a reliable source?
to and around the range.
l Do the cooking utensils have
l Is the Oven Control turned to a tem-
smooth, flat bottoms and fit the sur-
perature setting or BROIL?
face burners?
If burner falls to light:
l Is the range connected to electrical
2. If you need service
powef?
or assistance . . .
l iiave you checked your home’s
Contact the dealer from whom the
main fuses or circuit breaker box? unit was purchased to obtain the
(See
name of the nearest Whirlpool autho-
rized service facility.
l Are burner ports clogged?
page 15.)
If burner flames ore uneven:
l Are burner ports clogged?
pagelS.
[See
If burner flames lift off ports, ore
yellow, or ore noisy when turned off:
l The air/gas mixture may be incor-
rect. (Call for service.)
If burner makes a popping noise
when ON:
l Is the burner wet from washing? Let
dry.
3. If you need FSP”
replacement parts . . .
FSP is a registered trademark of
Whirlpool Corporation for quality
parts. Look for this symbol of quality
whenever you need a replacement
part for your Whirlpool appliance. FSP
replacement parts will fit right and
work right, because they are made to
the same exacting specifications
used to build every new Whirlpool
appliance.
To locate FSP replacement parts in
your area, refer to Step 2 above.