Filter
Top Products
©2005 Maytag Services 16025909 Rev. 0 39
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
Disassembly Procedures
WARNING
!
23.Set the tub on the floor. Position 4" wood blocks or
equivalent around the spinner shaft. Roll the tub to
the upright position and rest it on the blocks.
.
24.Remove the 10mm screws around the perimeter of
the tub.
NOTE: Torque tub bolts to 6-11 ft. lbs.
25.Separate the front and rear halves of the Outer Tub.
26.Tub Gasket can be replaced after tub halves are split.