Filter
Top Products
6
MICROWAVE OVEN CONTROL
Display
When power is first supplied to the microwave oven, “0” will
appear in the display. If the “0” appears in the display at any
other time, a power failure has occurred. Reset the clock if
needed.
When the microwave oven is in use, the display shows cooking
power, quantities, weights and/or prompts. When the microwave
oven is not in use, the display shows the time of day (if the Clock
is set).
Start
The START (START ENTER) pad begins any function. If cooking is
interrupted, touching START will resume the preset cycle.
Off
The OFF (OFF CANCEL) pad clears any incorrect command and
cancels any program during cooking. It will not erase the time of
day.
The microwave oven will also turn off when the door is opened.
Close the door and touch START to resume the cycle.
Add Minute
The ADD MINUTE pad starts the microwave oven for 1 minute at
100% power. More cook time may be added in 1-minute
increments by touching ADD MINUTE repeatedly.
The Add Minute function may be used only when no other
function is operating.
Clock
This is a standard 12-hour clock (12:00-11:59).
To Set:
The microwave oven must be off.
1. Touch CLOCK SET.
2. Touch number pads to enter correct time of day.
3. Touch CLOCK SET.
Tones
Tones are audible signals, indicating the following:
One tone
■ Valid entry (short tone)
Two tones
■ End of stage in multistage cooking
■ Control Lock active (short tones)
Three tones
■ End of cycle
Five tones
■ During Auto Defrost cycle, reminder to check, turn, rearrange,
or separate food
Control Lock
The Control Lock disables the control panel pads to avoid
unintended use of the microwave oven.
To Lock/Unlock Control: The microwave oven must be off.
Touch and hold START for 5 seconds until 2 tones sound and
“L” appears in the display. Repeat to unlock and clear the display
(2 tones will sound).