Changing or adding defrost time
You can change the defrosting time while the QUICK DEFROST Cycle is operating:
I. Touch QUICK DEFROST.
2. Touch numbers for the new time.
3. Touch START.
Any new time setting made while QUICK DEFROST is operating will continue the
defrosting only at 20% of full Cook Power.
The best time to change the setting is near the end of the QUICK DEFROST Cycle.
1. Open the door.
2. Check the food with long-tined fork; if center area IS hard frozen, set additional time.
Remember that standing time will further defrost the food.
3. Close the door and touch START to continue the cycle if no additional time is needed
4. Or, touch in new instructions if additional time is needed.
Cooking automatically after defrosting
The controls can be set so the microwave oven goes automatically from defrosting to the
Cook Cycle you have touched In.
DO THIS...
1.
Put frozen food in the oven
and close the door.
THIS HAPPENS...
I
m
.
‘,
2.
Touch QUICK DEFROST.
3. Touch Number Pads for
defrosting time you want.
m
. .
4.
Touch COOK.
The QUICK DEFROST Signal Light will
come on and the Display will show
four 0’s.
The Display will show the numbers
you touched in the order you
touched them. This example shows
2 minutes, 30 seconds.
The COOK Signal Light will come on
and the Display will show four Ok.
The Display will show the numbers
you touched in the order you
touched them. This example shows
3 minutes, 25 seconds.